Equipamiento opcional

Front PTO

Front PTO, available as an option fitted on the production line is only available with the front linkage, is rated at 1000rpm and activated electro hydraulically by a switch on the right-side panel within the cab. The front axle suspension can be fitted together with the front PTO and a front loader.

Front PTO

Front linkage

The lift capacity of the front linkage is 3600kg (N101-N141) and 2500 kg (N82-92). The front linkage can be fitted with a 1000 rpm front PTO, depending on farm or contracting requirements. Using implements attached to both ends of the tractor significantly increases working efficiency and productivity. For the models N101-N141 the front linkage can also be specified with front axle suspension.

Front axle suspension (N101-N141)

Valtra's hydro pneumatic front axle suspension significantly increases driving comfort on roads or in the field. Either operating with trailers or mounted equipment allowing fast, safe and comfortable journeys across a variety of terrain and surfaces. On field work the front suspension can significantly increase pulling efficiency, and may be switched on and off from the cab as required.

Cruise control

Cruise control is a useful option for many types of operation, increasing both driver comfort and work efficiency. The driver sets the desired driving or PTO speed. This pre-set speed is then maintained automatically regardless of changes in load. When turning on the headland or stopping work, the speed can be temporarily returned to idle or a pre-set speed at the push of a button. The working speed is then regained automatically by pushing the cruise button again. Cruise control makes routine work simpler and faster while quality and productivity are also improved.

Valtra ISOBUS - Controlling implements is easier than ever

ISOBUS is a standardised system for communicating and sharing data between the tractor and implement. A Virtual Terminal inside the cab is used to control implements and to display input and save information. ISOBUS makes it easy to control modern implements, especially those with many features and a high level of automation. The number of ISOBUS implements on the market is increasing rapidly.

Valtra front loaders

ENGANCHE DELANTERO
VALTRA LH-LINK, ENGANCHE
DELANTERO PIVOTANTE
TDF DELANTERA
GIROFAROS
CABINA SUSPENDIDA
NEUMÁTICOS ESPECIALES
TWINTRAC
CONTRAPESOS ADICIONALES
Contrapesos delanteros, 10 o 12 x 40 kg
Contrapesos traseros de rueda 34-42”, 4 x 80 kg
Contrapesos para el tripuntal 650 kg
GUARDABARROS
Guardabarros delanteros, 4 WD
Guardabarros traseros, anchura de montaje 2550mm
VÁLVULAS
Válvulas opcionales delanteras y traseras
Válvula de freno de remolque
Freno neumático de remolque
Válvulas para servicios externos
Preinstalación de cargador frontal
Cargador frontal
Control electrónico cargador izda/dcha sistema hidráulico
delantero
Reguladora de caudal
EQUIPAMIENTO ELECTRÓNICO
Acoplamiento y desacoplamiento de la TDF trasera
Paquete Infolight (Xenon)
1 o 2 girofaros en el techo
Espejos laterales eléctricos calefactables
Mando de parada
Luces de conducción superiores
Señal de acoplamiento del implemento ISO 11786
Acoplamiento ISOBUS ISO 11783
Terminal ISOBUS/AG2
AutoGuide 2
Interruptor principal eléctrico
Indicador de giro a la derecha
Control de crucero
Tomas de potencia eléctrica
Brazos inferiores telescópicos o enganche de bola
Nivelación hidráulica
Tercer punto hidráulico, estándar o enganche de bola
Limitador automático lateral
CABINA
TwinTrac
Aire acondicionado, manual o automático
Soporte para monitor de implementos
Asiento de suspensión neumática
Asiento Valtra Evolution
Calefactor inferior
Cabina forestal, vidrios laterales en policarbonato
Cabina forestal, vidrios laterales templados
Trampilla en el techo
Cinturón de seguridad
Kit de primeros auxilios
Extintor de polvo seco